EgdeGate 483 - Telco Systems EdgeGate 483 Switch - Simple Type: Switch
- Part Number:
- EgdeGate 483
- Model Number:
- EgdeGate 483
- Make:
- TELCO SYSTEMS
- Lead Time:
- Available
- Qty In Stock:
- Available
Telco Systems EdgeGate 483 Switch - Simple Type: Switch
The EdgeGate 483D provides a triple play, all-in-one, future-proof outdoor CPE designed to deliver voice, video, and data services to homes, small office/home office (SOHO), and small enterprises. The EdgeGate 483 supports both 100M and dual 1G uplink in the same product, future-proofing the network. Upgrade to 1Gbps is simply done in the field by replacing the SFP. No change in the electronics or installation is required. The optical uplink supports 100M or 1G Ethernet over traditional fiber pair or single-strand bidirectional fiber which cuts costs in half (CWDM option is also available). The EdgeGate 483D provides a second 1Gig uplink that allows a single fiber strand to serve multiple houses in a daisy chained or a ring network. Together with the Telco Systems carrier class L2/L3 switches, the EdgeGate 483D provides an end-to-end Active Ethernet Fiber-to-the-X (home/curb/business) solution.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- 2 analog voice ports with superior voice quality plus 802.1p Voice priority
- 8x10/100BaseT LAN ports Enhanced Layer 2 switching with QoS
- Automatic fax/modem detection
- Automatic tone generation: dial, busy, fast busy, ring back, stutter tone, distinctive ring
- Comfort Noise Generation (CNG)
- DTMF detection and generation
- Dual 1G uplink to support chain or ring
- Egress and ingress rate limiting
- Enhanced call features: Caller ID, call hold, attended/ unattended call forward, 3 way conferencing, redial
- Enhanced mechanics and cable management
- FTTH/B active Ethernet outdoor CPE
- Full SIP and MGCP support
- Future-proof – supports both 100M and 1G Wire speed performance with many SFP uplink options
- IGMP support to enable high quality
- Interop with most softswitches in the market
- IPTV service
- Layer 3 TOS marking
- Optional analog video overlay to allow for use of existing analog headends
- Part of complete end-to-end solution
- RTP voice packet encapsulation
- Supports tiered installation process fiber first and electronics later
- Unmatched QoS using standard based tools like 802.1q, TOS marking and voice priority
- Voice (VoIP) video, data and home networking all in one box
- Voice Activity Detection (VAD)
- Zero-touch mass auto-configuration and auto provisioning using TFTP or HTTP
Specifications
- CODECS (concurrently on both ports): ITU G.723.1, ITU G.711 (µ-law, A-law), ITU G.726, ITU G.729, ITU T.38, ITU FXS
- Compatibility: Voice protocols, SIP (RFC 2543, RFC 3261), MGCP (RFC 2705, RFC3435, NCS)
- Enclosure: Plastic enclosure, Separation between customer and technician access, Variety of options for cable termination and cable management
- Interfaces: Uplinks, Combo 100M and 1G ports, 100BaseFX SFP, 1000BaseX SFP, Variety of SM, MM and bi-directional LX, SX, ZX SFPs, Secondary 1G uplink (GW- 483D only), 1000BaseX SFP
- LAN Ports: 8x10/100BaseTx LAN Interface, 10/100BaseT RJ-45, Full/half duplex, IEEE 802.3 IEEE 802.3u Auto negotiation
- Management: SNMP Client MIBs, MIB II, private MIB, Web-based management TELNET, SNMP, web
- QoS: IEEE 802.1p, IEEE 802.1q, TOS L3 marking on VoIP frames of internal FXS, Internal priority for VoIP traffic, Egress and ingress rate limit, Spanning Tree running RSTP, IEEE 802.1x flow control
- Switching Characteristics: Technology, Advance chip set based, Store and forward, full wire speed 8K MAC addresses
- Telephony Interface: 2x FXS, Analog Connector RJ-11 (POTS), 5 REN, 600 feet cable
- Video: IGMPv2 Snooping with fast leave, RFC 2236 IGMPv2, RFC 2068 HTTP
Applications
- None Available
Aliases
- None Available
Related Items
EL300-ALM
Alarm SIMM- EL300-SW1
IP Router Software Includes Frame Relay - EL300-1100
T1, 24 FXS Ports, Ethernet - EL300-1101
E1, 30 FXS Ports, Ethernet E1 + X.21