TELCO SYSTEMS Industrial Partner

OTM1000 - Telco Systems OTM1000 Terminal Multiplexer - OC-3 Terminal, Flow through...

larger image

Request Quote
For Price
Part Number:
OTM1000
Model Number:
OTM1000
Make:
TELCO SYSTEMS
Lead Time:
Available
Qty In Stock:
Available

Telco Systems OTM1000 Terminal Multiplexer - OC-3 Terminal, Flow through TL1 and SNMP management, DS3 Interface, DS1 Interface, optical SONET edge solution Simple Type: System

EdgeLink OTM1000 is the first optical SONET edge solution that allows service providers to deliver traditional T1, T3, and Ethernet services over an OC-3 fiber feed via virtual concatenation (VC), without the wasted bandwidth found with traditional Packet over SONET (PoS) offerings. EdgeLink OTM1000 efficiently delivers voice and data over the last-mile. It optically transports an OC-3 to locations where copper cannot reach, where voice and data service delivery needs exceed T1 or T3.EdgeLink OTM1000 is ideal for connection to fiber spurs off a carrier's SONET backbone ADM or in point-to point applications for extension of T1, T3, and Ethernet from a CO or POP. Key differentiators for EdgeLink OTM1000 in the SONET terminal multiplexer market are its flexibility and efficiency. It has the ability to VC two STS-1 payloads into a single payload that can carry a 100BaseT Ethernet (fast Ethernet) connection with a DS3 available for delivery or to be used with an M13 for T1 fan out. Other configurations include: 3 DS3s, 2 DS3s and 8 10BaseT Ethernet ports, 1 DS3 and 1 Fast Ethernet port,or 2 DS3s and 12 DS1s. The VC scheme uses maximum efficiency as opposed to wasting bandwidth by mapping a 100BaseT Ethernet connection to a single OC-3 155 Mbps, which is typical with packet over SONET (PoS).

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • 1:1 circuitry protection, 1+1 optical redundancy
  • Compact – only 3 RU high by 7" wide - 3 units can fit side-by-side in a 23" rack
  • CPE packaging
  • Efficient delivery of Ethernet using existing SONET networks
  • Extended temperature operation for uncontrolled environments
  • GR-253 compliant OC-3 transport
  • Highest, most flexible drop port options available in its class (T3, T1, Ethernet)
  • Hot insertion and card swap out
  • Interoperability and DCC compatibility to higher-order Add/Drop Multiplexers
  • NEBS Level 3 certified

Specifications

    General
  • AIS Line Rate: 1.544 Mbps ± 32ppm
  • Alarm Contact: Wire wrap
  • Altitude: Up to 13,000 ft above sea level
  • Cable: 728A, RG-6/U, 734U, 735U
  • Cable: ABAM or equivalent
  • Compliance: FCC 15 (Class A), UL 1950, CSA 22.2, GR-499-CORE, GR-253-CORE, GR-1089 & GR-63 (NEBS Level 3), ITU-T G.707, G.7041 (GFP, VC)
  • Craft/Modem: 9 pin D Male
  • Current Draw: 500 Amps typical
  • Dimensions: Height 5.25” -3 rack unit, Width 7”, Depth 10”, Weight 8 lbs fully loaded
  • DS1: RJ45
  • DS3 Electrical: BNC, male
  • Ethernet: RJ45
  • Ethernet/Telnet: 10BaseT RJ45
  • External Clock: Dual source wire wrap
  • Fiber: Single-Mode 1310 nm
  • Framing: P-Bit (M13)
  • Heat Dissipation: 78 BTU
  • Line Code: B3ZS
  • Line Code: Selectable AMI/B8ZS
  • Line Impedance: 100 ohm, nominal balanced
  • Line Impedance: 75 ohm, unbalanced
  • Line Rate: 1.544 Mbps ± 32ppm
  • Line Rate: 155.52 Mbps ±32ppm
  • Line Rate: 44.736 Mbps ± 20 ppm
  • No. Duplex Lines: Up to 3 per shelf
  • Number of Lines: Up to 12 per shelf
  • Number of Lines: Up to 8-10BaseT or 1-100BaseT per shelf
  • OC-3: Optical SC
  • Operating Temperature: -40°C to 65°C
  • Power: Dual feed terminals
  • Power Consumption: 23 watts typical
  • Power Level: -2.7dBm to +4.7dBm
  • Power Level: -8 dBm to –15 dBm
  • Pulse Amplitude: .36V to .85V
  • Pulse Amplitude: 2.4V to 3.6V
  • Range: 100m
  • Receive Sensitivity: -36dBm6
  • Recommended Max Fuse: 5 Amps
  • Redundancy: 1+1
  • Redundancy: 1:1
  • Relative Humidity: Up to 90%, non-condensing
  • Span: 15km IR, 40km LR
  • Span: 450 ft. to cross-connect
  • Span: 655 ft. to cross-connect
  • System Management: Embedded SNMP Management, TELNET, TL1 Alarming and Provisioning over TCP/IP or TELNET, Local Craft VT-100/ANSI Terminal (Menu-driven), Office Alarms (4 input and 4 output), Status LEDs, DCC Formats IP, OSI, PPP (Header only), PPP (Full stack), 4 Levels of Security
  • Transmission: Full duplex flow control
  • Voltage: -41.5 to -56.3 Vdc

 

Applications

  • None Available

Aliases

  • None Available